EasyManua.ls Logo

fothermo PVB-10 - Page 5

fothermo PVB-10
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.fothermo.com PVB-10, PVB-30, PVB-80 3
1. hot water tank
Warmwasserspeicher
4. shut-off valve*
Sperrhahn*
7. cold water
Kaltwasser
2. water inlet
Wasserzufluss
5. combined check and pressure relief valve
Kombiniertes Rückschlag- und Überdruckventil
8. hot water
Warmwasser
3. water outlet
Wasserabfluss
6. pressure reducing valve*
Druckminderventil*
* not included
nicht im Lieferumfang enthalten
Heating times depending on the photovoltaic power
Heizzeiten in Abhängigkeit der Photovoltaikleistung
Start temperature 15 °C - End temperature 65 °C
Starttemperatur 15 °C - Endtemperatur 65 °C
Photovoltaic Power
10 l
30 l
80 l
~ 200 W
~ 3 h
~ 9.5 h
~ 24.5 h
~ 400 W
~ 1.5 h
~ 4.5 h
~ 12.5 h
~ 550 W
~ 1.25 h
~ 3.75 h
~ 9 h
~ 550 W … 1500 W
~ 1.25 h
~ 3.75 h
~ 9 h
Note: The values given in the table are intended as a guideline. The heating times depend on many factors (power, ambient air
temperature, water withdrawal) and may differ from reality. The greater the connected photovoltaic power, the more the
water can be heated on days with low solar radiation. The water is heated with a maximum power of 550 W, even if more
photovoltaic power is available.
Hinweis: Die in der Tabelle angegebenen Werte sind als Richtwerte zu verstehen. Die Aufheizzeiten sind von vielen Faktoren abhängig
(Leistung, Umgebungslufttemperatur, Wasserentnahme) und können von der Realität abweichen. Je größer die angeschlossene
Photovoltaikleistung ist, desto stärker kann das Wasser an Tagen mit geringer Sonneneinstrahlung erwärmt werden. Das Wasser
wird mit einer maximalen Leistung von 550 W erwärmt, auch wenn mehr photovoltaische Leistung zur Verfügung steht.
Table 1: Component description
Tabelle 1: Komponentenbeschreibung

Other manuals for fothermo PVB-10