Foundations 200EH - User Manual

To Next Page

This page is for printing and document

formating specications only.

THIS PAGE DOES NOT PRINT.

DO NOT scale the artwork for printing. Each page

has been scaled for proper scaling of parts.

Page 1 will be the cover page and rst page printed

after this specication page. Any blank pages needed will

be placed at the end of this booklet.

printer to arrange boklet pages in proper

sequence according to page number.

11 Inches

8.5 Inches

Revisions.

B. Added liner installation step 10. Corrected french warnings.

C. Changed wall anchors item F from 5 to 6. RMK ACN029

Need help?

Do you have a question about the Foundations 200EH and is the answer not in the manual?

Summary

Specifies minimum required knee clearance for ADA compliance.

Details maximum allowable protruding objects for ADA standards.

Outlines required forward reach dimensions for ADA compliance.

Details required side reach dimensions for ADA compliance.

Information regarding proper unit operation per ADA standards.

Specifies work surface requirements according to ADA.

General