EasyManua.ls Logo

Founter MA20 - Routine Maintenance; Simple Failure Troubleshooting

Founter MA20
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
Transport vehicle or cart with barrel logistics can be a location to be further processed
or refrigerated location. Transport vehicle using the barrel can save time, save labor,
and to improve workflow. These devices are configured by the device worth
equipping.
XV Maintenance
1, Do clean the barrel and mixers promptly after use, to ensure food hygiene.
2, The machine has joined the transmission quality at the factory grease. In general, it
can be used for six months. For adding or replacing grease, please open the lid, add
directly from the added hole or replace the grease.
XVI Removal Method of Simple Failure
XVII Electrical Schematic Diagram
Malfunction
Cause
Removal Method
Boot shaft does not rotate Bad electrical Check the electrical wiring
Leaking Wear and tear in seal circle Replace the seal circle
Motor temperature is too high, and
the speed reduces.
Low in voltage
Measure the voltage
Overload Reduce the load
Over speed or wrong use of
the blender
Choose
the right blender as
described
Noisy and hot Transmission poor lubrication Add or replace the grease
Blender grazing
Mixer or mixing barrel
distortion
Correct or rep
lace the
distorted mixer and mixing
barrel.