Min. 110mm
Ceiling void
This product is Class II insulated.
Earth connection not required
Cut-out 50mm
Ensure that the mains supply is switched off Before
installing, maintaining or servicing the luminaire.
1: Isolate mains
2: Ceiling cut-out
3:
Cable size and strip length
4: Connect mains
6:
Complete labels
7: Restore mains supply
0.75 -1.5mm
2
8+1mm
N
L
5: Install luminaire into ceiling
110mm
Blue
(Permanent)
Brown
N
L
Part.No.:
Input voltage: 220-240V AC 50Hz
X 1 180
Installation date: __ / __ / ____
Part No.: 3.6V 5000
Secondary Li-ion Battery Pack
Li18650-5000mAh
3.6V 5000mAh 18Wh
1ICR19/66-2
Mfg date:
Installation date: / /
MAX Downlight range
Ref.
Description
Operating
temp. ta
Net
weight
Remote Control
Testing
Installation Guide:
0°C - 40°C
0.25kg
FXD02-3/O/3
FXD02S-3/O/3
Recessed LED Downlight 3hr NM 270lm - Open Area Lens
Recessed LED Downlight 3hr NM 270lm - Open Area Lens SELF-TEST
Manual
Self-test
REM10
REM10
FXD02 Emergency LED Downlight
Secure mains cable using
cable clip and screws supplied
*
Remote Control REM10 allows the competent user to carry out functional tests and/or full duration tests at any time and to check system status. Please refer to REM10 user guide.
- Enter installation date on
battery label
- Enter the appropriate code on
the luminaire label
lssue V1: 5/1/2020
t | +44(0)1543 396400 | e | hello@fox-lux.co.uk |w| www.fox-lux.co.uk
Registered Office: Alex House 260/8 Chapel Street, Salford, Manchester, M3 5JZ
Company Registration No. 11821284 VAT Registration No. 320 9921 12
To Previous Page
Loading...