This document is a user manual for the Fox Spirit PGM270 V2 curved monitor.
Function Description
The Fox Spirit PGM270 V2 is a 27-inch QHD (2560x1440) curved monitor designed for various applications, including gaming and general use. It supports a high refresh rate of 165Hz and features Adaptive-Sync technology, which helps to eliminate screen tearing and stuttering for a smoother visual experience. The monitor offers multiple display modes (Standard, RTS/RPG, FPS, MOBA Arena) and image adjustment options to optimize viewing for different content types. It also includes PIP/PBP (Picture-in-Picture/Picture-by-Picture) functionality, allowing users to display content from two different sources simultaneously. The monitor is equipped with various connectivity options, including HDMI and DisplayPort, and has an audio output for headphones or external speakers.
Important Technical Specifications
Display:
- Panel Size: 27 inches / 68.6 cm
- Panel Type: VA
- Curvature: R1500
- Backlight: ELED
- Rear LED: Yes, red
- Brightness: 350 cd/m2 (Typ.), 320 cd/m2 (Min.)
- Contrast Ratio: 4000:1
- Dynamic Contrast Ratio: 1000000:1
- Pixel Pitch: 0.0777(H)*0.2331(V) mm
- Resolution: QHD 2560x1440 pixels
- Display Viewing Area: 596.736(H) x 335.664(V) mm
- Refresh Rate: 165Hz
- Aspect Ratio: 16:9
- Response Time: 11 ms (6ms OD / 1 ms MPRT active)
- View Angle (CR>10): H:178°, V:178°
- Anti-glare: Yes
- Colors: 16.7M colors
- Touch Screen: No
- Horizontal Frequency: 186 - 243 MHz
- Vertical Frequency: 48 - 165 Hz
- HDR: HDR 400 Ready
Connectors:
- VGA: No
- DVI: No
- HDMI: 2x HDMI 2.0
- DP: 2x DP 1.4
- Mini DP: No
- Audio Input: No
- USB 3.0: No
- Speakers: No
- Audio Output: 1x Jack 3.5mm female
Power Source:
- Consumption: Normal: 36W, Max: 42W, Power saving mode: <0.5W, Power Off Mode: <0.3W
- Power Adaptor: DC 12V/4A – 48W
- Power Source: DC in
- Operating Temperature: 0 ~ 40 °C
- Storage Temperature: -20 ~ 60 °C
- Humidity: 10 ~ 90% RH
Physical Features:
- Dimension with Stand (WHD): 616.2x523.2x237.6mm
- Dimension w/o Stand (WHD): 616.2x367.2x99.9mm
- Net Weight: 6 Kg
- Gross Weight: 7 Kg
- Material: Front cover – PC, Back Cover – ABS, Arm – AL+ABS+SGCC
- Tilt: -5°~20°(±1.5°)
- Pivot: No
- Swivel: Yes (-30°~+2°)
- Adjustable Stand: Distance 100mm (±5), Min. Height 423.2mm (±5), Max. Height 523.2mm (±5)
- VESA: VESA 75x75mm
Other Features:
- Flicker-Free: Yes
- Low blue light: Yes
- DCR: Yes
- Adaptive Sync: Yes (HDMI 2.0: 48-144Hz, DP 1.4: 48-165Hz)
- OSD Language: 7 Languages (English, Simplified Chinese, Korean, Russian, Spanish, Japanese, French)
Usage Features
Installation:
The monitor comes with a stand that requires assembly. The base and stem are attached to the monitor using a thumb screw and a locking button. For wall mounting, the monitor supports VESA 75x75mm standards, and users must remove the stand and attach a VESA bracket (not included). It is crucial to handle the monitor carefully during installation, avoiding pressure on the LCD screen.
Connectivity:
The monitor offers two HDMI 2.0 ports and two DisplayPort 1.4 ports for video input, supporting refresh rates up to 144Hz via HDMI and 165Hz via DisplayPort with Adaptive-Sync enabled. An audio output (3.5mm jack) is available for connecting headphones or external speakers. Power is supplied via an external power adapter.
On-Screen Display (OSD) Menu:
The OSD menu is navigated using six buttons located on the back of the monitor.
- Button 1 (Menu/Sub-menu): Press to enter the main menu or sub-menus, or quickly access a sub-menu.
- Button 2 (Down): Press to move down in the menu.
- Button 3 (Up): Press to move up in the menu.
- Button 4 (Return/Color Format): Press to return to the previous menu or quickly switch the color format.
- Button 5 (Power On/Off): Press to turn the monitor on or off.
- Button 6 (LED Indicator): This is an LED indicator, not a functional button.
The OSD menu provides extensive options for adjusting display settings, organized into categories:
- Game Settings: Includes Standard Mode, RTS/RPG Mode, FPS Arena Mode, MOBA Arena Mode, Adaptive-Sync (On/Off), Shadow Balance (0-100), Response Time (Off/Normal/Fast/Ultrafast), Refresh Rate (On/Off), Game Crosshair (On/Off), Game Time (On/Off), Dynamic Brightness (Off/Normal/Expert/Elaboration), HDR (Off/HDR Standard), MPRT (Off/On), and Ambient Lighting (Off/On).
- Picture Settings: Includes Brightness (0-100), Contrast (0-100), DCR (Off/On), Contextual Model (Off/On), Low Blue Light (0-100), Sharpness (0-5), Gamma (1.8/2.0/2.2/2.4/2.6/S.curve), and Aspect Ratio (Wide Screen/4:3/1:1/Auto).
- Color Settings: Includes Cool, User1, User2, User3 (all Off/On:0-100(R/G/B)), Hue (0-100(R/G/B/C/M/Y)), and Saturation (0-100(R/G/B/C/M/Y)).
- PIP/PBP Settings: Includes PIP/PBP Mode (Off/PIP Mode/PBP 2Win 1:1), Sub-Signal Source (DP1/DP2/HDMI1/HDMI2), Audio Source (Auto/DP1/DP2/HDMI1/HDMI2), PIP Position (Top Right/Top Left/Bottom Right/Bottom Left), PIP Size (Small/Medium/Large), and Window Swap (Off/On).
- OSD Settings: Includes Language (various options), OSD Time Out (5-60 seconds), OSD H-Position (0-100), OSD V-Position (0-100), OSD Transparency (0-5), Hotkey1 Setting (Brightness/Contrast/Volume/Mute/Shadow Balance/Game Crosshair), Hotkey2 Setting (Refresh Rate/Game Time/Contextual Model/PIP/PBP Mode/Input Signal/Dynamic Brightness/HDR), Hotkey3 Setting (Dynamic Brightness/HDR), OSD Rotation (Normal/90/180/270), and OSD Lock (Off/On).
- Other Settings: Includes Input Signal (Auto/DP1/DP2/HDMI1/HDMI2), Volume (0-100), Mute (Off/On), Auto Power (Off/On), Eyeshield Remind (Off/On), Reset (No/Yes), and Information (Input Source/Resolution/Mode/SN).
Adjusting the Monitor:
The monitor allows for tilt adjustment from -5° to +20° (±2.0°) and rotation from -30° to +30° (±2.0°). The height can also be adjusted by 100mm (±5.0mm). Users are advised not to touch the screen while adjusting to prevent damage.
Cable Management:
The monitor features a cable management system where cables are routed through a slot in the stand and covered by a back cover for a neat setup.
Maintenance Features
Safety Precautions:
- Always read the instructions before use.
- Avoid exposing the monitor to fire, electric shock, or humidity.
- Do not open the monitor back cover as it contains user-serviceable parts and dangerous voltages.
- Place the monitor on a stable surface.
- Do not put anything on top of the monitor.
- If the power supply is lost, contact the distributor.
- Ensure all cables are properly connected and undamaged.
- Use only the specified power source.
- Use an appropriate outlet compliant with local electrical norms.
- Avoid placing heavy objects on the power cord.
- Do not use the monitor in high temperature, humid, dusty, or oily areas.
- In case of storm or prolonged non-use, unplug the screen.
- Disconnect the power cord before moving the monitor.
- Do not insert objects into the cabinet slots.
- Use a power cord that matches the AC voltage of the power outlet.
- The power cable connector is the primary means of detaching the system from the power supply.
Cleaning:
- Turn off and unplug the display before cleaning.
- Clean the panel surface with a lint-free, non-abrasive cloth. For stubborn stains, use a wet cloth and a gentle specific solution.
- Avoid using cleaning products containing alcohol or acetone on LCD screens. Never spray any liquid directly on the screen to prevent electric shock.
- Ensure no liquid enters the display housing when cleaning.
- Clean the housing with a slightly humidified cloth and a gentle detergent, then wipe it with a dry and clean cloth.
- Do not insert anything into the unit or spill liquid on it.
Troubleshooting:
The manual provides a troubleshooting guide for common issues:
- Blank screen: Check power button, brightness/contrast settings, indicator light, video source, and notebook/laptop power/extension mode.
- Image out of focus: Ensure video cable is properly inserted.
- Screen is flashing: Check power source, non-shielded speakers, fluorescent lighting, AC transformers, cable runs, etc., and maintain a safe distance from magnetic disturbances.
- Color bleeds or visual effects appear unusual: Check if the cable is properly inserted, if there's a loose connection, or a bad signal. Try connecting another video source for comparison.
- Screen appears to be scrolling, rolling, or moving unusually: Check source frequency (48-165Hz) and ensure video cable is secure.
- LED indicator doesn't work: Check power and power cable connection.
- Plug&Play doesn't seem to work: Check PC requirements and graphics card requirements for compatibility.
- Image is dim: Adjust brightness and contrast ratio via OSD.
- Image displays jitter/moire pattern: Nearby electric equipment may be interfering.
- Light indicator is on or flashing, but there is no image displayed on screen: Check monitor power and graphics card installation.
- Image position is not centered / the image size is not right: Adjust image positioning and size in the OSD menu.
- Colors are not optimized: Adjust RGB color settings or reset color temperature in the OSD.
Special Notes on LCD Monitors:
- Flicker during initial use or turning off the Power Switch is normal.
- Slight uneven brightness is normal.
- An afterimage may remain after switching images, but the screen will recover slowly by changing the image or turning off the Power Switch for hours.
- If the screen flashes erratically or the backlighting fails, contact the dealer; do not attempt to repair the monitor yourself.
Certifications:
The monitor complies with CE (EMC 2014/30/EU and LVD 2014/35/EU) and RoHS (Restriction of Hazardous Substances) directives. It also features the HDMI logo, indicating compliance with HDMI standards. The product is marked with the WEEE symbol for selective sorting of waste electrical and electronic equipment.
Need help?
General
To Next Page