• Risk of electrical shock
• Do not open so as to reduce the risk of electrical shock
• Do not remove the back cover. There are no useful parts inside.
• The removal of the back cover makes the guarantee invalid.
• The LCD must only be repaired by qualified personnel.
Warnings and precautions
Do not put your hands or face or any object near the LCD ventilation opening. The upper side of the
LCD is very hot because of the exhaust air that comes out from the ventilation openings. You may be at
risk for burns or lesions if you stay to close to the LCD. Do not place any object on the upper side of
your LCD.
Disconnect all cables before moving the LCD. If the LCD is moved while the cables are connected, they
can be damaged and an electrical shock or fire may occur.
Do not expose the unit to heat, water and/or humidity in order to avoid fire or electrical shock.
Use the LCD in a properly ventilated area and do not cover the ventilation openings.
Do not use a feeder different from the one supplied with the product.
Disconnect the LCD power cable when it is not used for long periods of time.
If the LCD does not display the image properly, disconnect the power cable. Check the Video IN
connections and reconnect the power cable.
Disconnect the LCD power cable when you want to clean the LCD. Do not use products that contain
alcohol: use only a slightly damp cloth.
Make sure the LCD is positioned firmly (not on a trolley) in order to avoid the unit from being damaged.
Safety directions
To Next Page
Loading...
General