37
Removal of the lower and upper burner and installation of the injector to the gas oven
Removal of the upper burner:
With the help of a screwdriver, remove the screw as shown in figure 8. As shown in figure 8.1, remove
the injector in the bearing with a socket wrench. In order to re-place the burner, apply the removal
process reversely.
Removal of the lower burner:
The lower burner door has been fixed with two screws. As shown in figure 9, remove it with the help of
a screwdriver. As shown in figure 9.1, remove the injector in the bearing with a socket wrench. In order
to re-place the burner, apply the removal process reversely.
To Next Page
Loading...