Franklin Fueling Systems EVO TS-550

Need help?

Do you have a question about the Franklin Fueling Systems EVO TS-550 and is the answer not in the manual?

Summary

Introduction

Replacement LCD Display Preparation

Prepare the replacement LCD Display and Interface Board by gathering parts and tools.

Replacement Instructions

Power Off and Panel Access

Turn off power, perform lockout/tagout, and remove the ATG front cover for access.

Interface Board Removal

Remove the old interface board by disconnecting cables and unscrewing mounting screws.

LCD Display Replacement

Remove the old LCD display and install the new one, connecting the appropriate ribbon cable.

Final Connections and Reassembly

Reconnect all cables, reassemble the front cover, and power up the system for testing.

Overview

This document provides installation instructions for the EVO-DISPREP EVO™ Series LCD & Display/Printer Interface Board, a component designed for use with Franklin Fueling Systems' Automatic Tank Gauges (ATGs). The manual details the process of replacing the 7" LCD display and the associated Interface Board in various EVO™ ATG models, including the EVO™ 550, EVO™ 5000, EVO™ 600, and EVO™ 6000. It emphasizes the importance of adhering to safety protocols and proper handling procedures throughout the installation process.

The primary function of the EVO-DISPREP EVO™ Series LCD & Display/Printer Interface Board is to serve as a crucial interface within the Automatic Tank Gauge system. It facilitates the display of information to the user via the 7" LCD screen and manages communication with a printer, enabling the output of critical data. This board is integral to the user interface of the ATG, allowing operators to monitor tank levels, alarms, and other essential operational parameters. The replacement procedure outlined in the manual addresses scenarios where the existing LCD display or interface board needs to be replaced due to damage, malfunction, or an upgrade.

Usage features of the device, as implied by its function, revolve around providing a clear and interactive display for the ATG. The 7" LCD display allows for visual monitoring of the tank gauge's status, making it easier for personnel to quickly assess the operational state of the fuel system. The interface board's role in connecting to a printer suggests its capability to generate physical records of transactions, inventory, or alarm events, which is vital for compliance, auditing, and operational management. The manual specifies that firmware version 2.25.1 or greater is required for the EVO™ 550 or 5000 models, indicating a software dependency for optimal functionality. This ensures that the new hardware components are compatible with the ATG's operating system, allowing for seamless integration and proper data processing. The design of the interface board, with its various connectors for backlight, ribbon cables, and touchscreen, highlights its role as a central hub for the display and input components of the ATG.

Maintenance features are primarily focused on the replacement process itself, which is a key aspect of maintaining the ATG system. The manual provides a step-by-step guide for replacing the LCD display and interface board, emphasizing careful handling to prevent damage to the new components. It instructs users to identify the existing interface board version (REV3 or REV4) to ensure the correct replacement is installed. The process involves turning off power to the ATG, performing lockout/tagout procedures for safety, and carefully disassembling parts of the ATG's front cover. Specific instructions are given for disconnecting various cables, such as the backlight connector, white ribbon cable, printer ribbon, and touchscreen connector, ensuring that the removal of the old components and installation of the new ones are performed without causing further damage. The use of Phillips and flathead screwdrivers is mentioned as necessary tools, indicating a straightforward mechanical installation. The manual also highlights the importance of proper cable routing and ensuring that the LCD is securely snapped into place with its grounding spring correctly positioned. After installation, the instructions guide the user to power up and test the system, confirming the successful replacement and functionality of the new components. The emphasis on using original FFS parts underscores the importance of maintaining system integrity and preventing potential hazards or environmental harm that could arise from using non-compliant components. The document also includes general operating precautions, such as checking for hydrocarbon vapors in containment sumps and securing the work area, which are crucial for the safety of personnel performing maintenance on ATGs.