FRC PumpBoss PBA100 - Program Code Descriptions

PBA100 Rev0305PreLim
23
PRELIMINARY DOCUMENT
FOR REFERENCE/REVIEW ONLY
Figure 7. 8-Pin Connector Wiring
8 Pin Connector/Cable
Pin Wire Color Description
1 Red Supply Voltage (9 to 30 VDC)
2 Black Ground
3 Orange +5 VDC Reference From ECM
4 White Throttle Signal To ECM
5 Green Signal Return From ECM
6 Yellow Interlock Input (12 or 24 VDC)
7 Blue Throttle Enable Signal Output
8 Brown Foot Pedal Signal Input
Note: Not all wires are used for all engines. Refer to the
engine specific wiring diagram for interface connections.
Control Module
Rear View
8-Pin
Connector
Pin 1
12-Pin
Connector
Pin 1
8-Pin Cable
RED
BLK
ORG
WHT
GRN
YEL
BLU
BRN
12
12
12
12
12
1
1
1
1
1
8-Pin
Deutsch
Connector
Butt
Connectors
+12 (24)
VDC
Ignition Key
+12 (24) VDC
Pump Engaged
Interlock
GND