Need help?Do you have a question about the Freefly MoVI and is the answer not in the manual?
General| Operating Temperature | 40 degrees C |
|---|---|
| Compatibility | DSLR, mirrorless, and small cinema cameras |
| Control Interface | mobile app |
| Mounting Options | 1/4"-20 and 3/8"-16 threaded mounts |
| Material | Carbon fiber, aluminum |
| Charging Time | Approximately 2 hours |
Explains the MōVI Wired Control Kit's advantage in crowded radio frequency environments for reliable control.
Details the 50ft RG-174 and 100ft RG-58 coax cable options, noting their flexibility and durability.
Connects the Freefly SMA RX (receiver) to the GCU COM1 port using a 5-pin cable for MōVI Pro/XL or M-Series.
Binds the MōVI Controller to the SMA RX by following instructions on page 13 of the MōVI Controller manual.
Guides routing of the coax cable through the pan motor for MōVI XL or around the pan motor for other MōVI models.
Attaches the RP-SMA to SMA adapter and DC blocker to the SMA RX, connecting the coax cable and mounting the receiver.
Powers on the system and verifies that all components are functioning normally after setup.
To Next Page
