Need help?Do you have a question about the Freeman PCN65 and is the answer not in the manual?
General| Type | Pneumatic Coil Nailer |
|---|---|
| Fastener Type | Coil Nails |
| Fastener Size | 1-1/4" to 2-1/2" |
| Operating Pressure | 70 - 120 PSI |
| Power Source | Pneumatic |
| Weight | 5.5 lbs |
| Magazine Capacity | 300 nails |
Always wear eye and hearing protection, and appropriate safety attire.
Read the manual carefully to understand applications, limitations, and potential hazards.
Always carry by the handle, keep dry, and check for leaks or proper function.
Avoid driving near edges, do not carry by trigger, and be aware of tool recoil.
Ensure connector does not hold pressure when disconnected to prevent accidental firing.
Do not load with controls activated; keep hands clear of discharge area.
Provides operational pressure, capacity, weight, and fastener compatibility.
Adjust air pressure based on fasteners and material; test to find consistent results.
Adjust the driving depth by turning the adjustment wheel; test on scrap material.
Describes contact actuation mode for fast, repetitive fastener placement.
Step-by-step instructions to remove jammed fasteners safely.
Lists common problems, possible causes, and suggested solutions.
Diagram and advice for connecting the tool to an air compressor.
To Next Page
