Need help?Do you have a question about the FreeWave HTP-900RE and is the answer not in the manual?
Details operational conditions, interference acceptance, and modification restrictions for FCC compliance.
Specifies maximum output power and minimum separation distance for RF exposure compliance.
Provides steps for users to correct harmful interference to radio or television reception.
Describes the HTP-900RE model and its electrical and ambient ratings.
Lists critical considerations for safe and compliant installation, including enclosures and wiring.
Instructions for physically mounting the transceiver and connecting antennas and computers.
Guidance on setting radio configuration via the Web page and adjusting transmit power.
Lists approved directional and omni-directional antennas for the HTP-900RE model.
Provides tables showing output power settings based on antenna gain and cable loss.
Details EIRP values for Yagi antennas, considering cable loss and RF transmit power.
Presents EIRP data for 8.15 dBi Yagi antennas, correlating cable loss and transmit power.
Step-by-step guide to configure the power output level via the transceiver's web interface.
Notes on using alternative antennas, gain limits, and EIRP restrictions for FCC compliance.
Discusses the impact of antenna placement on performance and minimizing interference.
Clarifies the function of the diagnostic port for data transmission only, not programming.
Specifies power source voltage, current requirements, and grounding for the transceiver.
To Next Page
General