10 11
f1900 FRIDJA WHOLE FRUIT SLOW JUICERENGLISH
STEP 2
Top-set and Base Assembly
For easy assembly hold the drum lid by grabbing the feeding tube and turn
clockwise as show in the illustration.
5. Place the bowl on the base so that its grey arrow lines up with the black
arrow on the base
4. Place the drum lid on to the juicing bowl aligning the red dot on the
drum lid with the red dot on the juicing bowl. Turn clockwise to close,
aligning the red dot on the drum lid with the closemark.
6. Open/Close mark on the top-set.
7. Place the pulp jug under the pulp spout and place the juice jug under
the juice spout as shown in the illustration.
TIP Juicer will not operate if parts are not assembled properly.
Detachable
To Next Page
Loading...