Page 9 of 16
Step 1 - Connect the Data Cable to your
computer and Sound Module.
Step 2 - You will see the drive show up
as “FSSM” in your computer, similar to a
flash drive.
Step 3 - At this point you can now add
or remove files to the sound module.
The easiest way is to open two windows
and put them side by side; one with the
files you have on your computer, and
one with contents of the FSSM drive
(the sound module).
Now, Drag and Drop the files from your
computer to the FSSM drive. This will
make a copy of the files on the Sound
Module which can then be played.
Step 4 - “Eject” the FSSM drive on your
computer before disconnecting the USB
cord from the computer or sound
module.
To Next Page
Loading...