▪ In order to avoid fire risk, wherever possible, ensure that the appliance is not in contact
with walls or with any hot element (compressor, condenser). Observe the installation
recommendations.
▪ The appliance should not be placed close to radiators or cooking hot plates or gas rings.
▪ Check that electrical sockets remain accessible when the appliance is installed.
▪ This refrigerating appliance is not intended to be used as a built-in appliance.
POWER SAVING
To limit the electricity consumption of your appliance:
▪ Install it in an appropriate place (see “Installing your appliance”).
▪ Leave the doors open as little time as possible.
▪ Do not put food that is still hot into the appliance.
▪ To ensure that the appliance operates properly, clean the condenser regularly (see
“Routine servicing of your appliance”).
▪ Regularly inspect the door seals and ensure that they are still closing properly. If this is
not the case, contact your after-sales service.
Trouble shooting
▪ Any electrical work should be carried out by a qualified and skilled technician.
▪ The appliance should be repaired by an accredited repair center, using only
manufacturer’s original spare parts.
Aesthetic and functional spare parts in accordance with REGULATION (EU) 2019/2019
(Annex II, point 3.), are available for after sales service network and end users for a
maximum period of 7 or 10 years (List on Annex II, point 3.a.1 et 3.a.2) from the date of end
of commercialisation on the market of the last unit. The list of spare parts and the procedure
for ordering them (professional access / end user access) are available on the following
website: www.interfroidservices.fr or by post at the following address: Interfroid Services,
123 Route du Chêne - 72230 ARNAGE.
For other functional spare parts not specified in EU regulation 2019/2019, they are available
for a period of 7 years.
The manufacturer's warranty is 1 year for functional parts.
To Next Page
Loading...
Need help?
General
