The coffee volume of the large cup is set by
default for a flow of approximately 47
seconds. Follow the steps below to change
the factory setting.
Place a cup on the drip grid, insert the
capsule adapter. Press and hold the large
cup button. Release once the desired volume
is reached. The new level of coffee volume is
stored.
Programmable flow time: 10 to 90 seconds.
To return to the factory settings,
unplug the power cord from the
wall outlet.
Press and hold the large cup
button, then plug the power cord
into the wall outlet.
The ON/OFF button blinks twice,
release the button. The appliance
has returned to factory settings.
12
To Next Page
Loading...
