50.8"(129cm)
toclearopendoor
freestandwasher
on_oor
floorline
washermountedon
optionalpedestal
floorline
29.75" (75.5cm)*
to front of closed door
water supply
connection
on rear of unit_
27.0"
(68.5cm)
i-- _ t
l
C111D
drain hose
on rear
of unit3
51.25"
(130cm)
36.0"
(91.5cm)
* To obtain these minimal depth dimensions, dryer must be vented straight back. Using a quick-turn 90° elbow (right or down on freestanding dryer) adds approximately 0.75 in. (2.0 cm)
to installation depth. Upward venting of exhaust on pedestal-mounted or freestanding dryer adds approximately 4 in. (10.2 cm) to installation depth. Leftward venting on
pedestal-mounted or freestanding dryer adds approximately 3.75 in. (9.5 cm) to installation depth. Downward venting of exhaust on pedestal-mounted dryer adds approximately
2.25 in. (5.7 cm) to installation depth.
_Hot and cold inlet hose length approximately 43 inches (109cm)
2Power supply cord length approximately 60 inches (152.5cm).
3Drain hose length approximately 52 inches (132cm).
50.8"(129cm)
to clear open door
29.75"(75.5cm)*_
to frontofclosed door
71.5"
(182cm)
water supply
connection
on rear of unit_
gas supply
pipe on rear
of gas unit
37"
(94cm)
27.0
(68.5cm)
power cord
on rear of unit 2
electrical
supply on
rear of unit
on rear
of unit 3
centerline
height for
rear vent
39"
(99cm)
* To obtain these minimal depth dimensions, dryer must be vented straight back. Using a quick-turn 90 ° elbow (right) adds approximately 0.75 in. (2 cm) to installation depth.
Upward venting of exhaust on stacked dryer adds approximately 4 in. (10.2 cm) to installation depth. Downward venting of exhaust on stacked dryer adds approximately
2.25 in. (6.5 cm) to installation depth. Leftward venting of exhaust on stacked dryer adds approximately 3.75 in. (9.5 cm) to installation depth.
_Hot and cold inlet hose length approximately 43 inches (109cm)
2Power supply cord length approximately 60 inches (152.5cm).
3Drain hose length approximately 52 inches (132cm).
To Next Page
Loading...
