9
Recommended Tools
• Level
• Appliance Slider
x2
x2
INSTALLATION
CAUTION
The cabinet is heavy. We recommend
two people to level the cabinet.
CAUTION
This unit does not have rollers. Use an
appliance slider or protective floor
covering while moving the unit into
place. Do not slide the unit with leveling
legs fully extended.
Leveling
Rest all bottom feet firmly on a
solid floor.
It is VERY IMPORTANT for your unit to
be level in order to function properly.
If the appliance is not leveled during
installation, the door may be misaligned
and not close or seal properly, causing
cooling, frost or moisture problems.
To Level the Appliance:
Insert the appliance slider under the unit.
Place the unit into its location. Use the
carpenter’s level to make sure the unit is
level from front to back and side to side.
First adjust the front leveling legs, and
then the rear if necessary. If you cannot
access the rear leveling legs, slide the unit
back out and adjust it. Slide the unit back
into place and recheck with the level.
Repeat if necessary.
To Next Page
Loading...
Need help?
General
