Frigidaire GRMS2773AF - Drawer and Crisper Cleaning

24
Removing CrispSeal Fresh Drawer
STORAGE FEATURES
Removing Auto Humidity
Control Membrane
Opening SnackZone
Recessed Snack Drawers
4. Remove the humidity membrane from
the housing by lifting up sliding over.
5. Clean humidity membrane with hot
soapy water.
6. Replace membrane in housing and
unit by reversing the steps above.

NOTE
We do not recommend replacing the au-
to-humidity membrane unless it becomes
damaged or ruined. If the membrane
becomes soiled, you can wash it with
soap and water. Ensure the membrane is
dry before replacing it in the unit.
To remove the auto humidity control
membrane for cleaning:
1. Reach to back of humidity control
cover.
2. Place fingers between the humidity
control and the back wall, pull up
on cover.
3. Pull cover toward the front of
cabinet and remove.
Removing Auto Humidity
Control Membrane
To remove the CrispSeal Fresh drawer
for cleaning:
1. Pull the drawer out until it stops.
2. Lift the front slightly and remove
the drawer.
SnackZone - Recessed Snack Drawers
These drawers are ideal for storage of deli
meats and cheeses.
To open: slide back the cover to allow
access to the drawers.

NOTE
Remove the crisper insert and the
Produce Keeper Plus filter before
washing the crisper.