EasyManua.ls Logo

Frigidaire GRQC2255BF - Installation; Door Opening; Cabinet Leveling & Refrigerator Door Alignment

Frigidaire GRQC2255BF
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
NOTE
After adjusting the screw, you might
need to swing the door to check for
proper alignment.
Door opening
The refrigerator should be positioned
to allow easy access to a counter
when removing food. For best use of
refrigerator drawers and freezer baskets,
the refrigerator should be in a position
where both can be fully opened.
INSTALLATION
3. Ensure both doors are bind-free with
their seals touching the cabinet on
all 4 sides and the cabinet is stable.
Cabinet Leveling & Refrigerator
Door Alignment (if necessary)
Guidelines for final positioning of refrigerator:
Firmly rest all 4 corners of the
cabinet on the floor.
Slightly elevate the front to ensure
the doors close and seal properly.
Align and level the doors with each other.
You can meet most of these conditions by
raising or lowering the adjustable anti-tip legs.
To level the cabinet using the anti-tip legs:
1. Slightly open freezer compartment.
2. Lower anti-tip legs until they are
both touching the floor. Use a pair of
pliers to adjust.
Door
Door
12.25 in
8.75 in
1 in
1 in
56.75 in
25.4 mm
.37 in
9.5 mm
.37 in
9.5 mm
To raise unit: turn leg clockwise.
To lower unit: turn leg counterclockwise.
To make final door height adjustments:
1. Open the lower doors to make the
middle hinge visible.
2. Insert the 10 mm wrench (included)
into the shaft of the middle hinge.
To lower door: turn the adjustment
screw clockwise.
To raise door: turn the adjustment
screw counterclockwise.

Related product manuals