Frisco 309374 - Assembly Instructions Part 1; Panel Bolt and Dowel Installation; Back and Side Panel Connection

1
3
4
2
STEP 1
STEP 3
STEP 4STEP 2
1
1
1
1
1
1
1
1
1
1
1
10
1
12
3
4
2
6
C
D
E
3
3
3
3
3
4
C
D
E
A
1
1
1
1
1
1
1
1
3
3
1
1
C
F
2
2
2
2
2
2
2
Screw the cam lock bolts (1) into the pre-drilled holes on the top panel (A).
The cam lock bolts go into the SMALLER holes.
Install the wooden dowels (3) into the larger holes on the side panels ( D and E).
Attach the back panel (C) to the side panels (D and E) by aligning the cam lock bolts (1) and wooden dowels (3)
with the corresponding holes. Tip: The semi-circle wire connector found on the wire mesh and cam locks (2)
should always be on the inside of the crate. 
Screw the cam lock bolts (1) into the pre-drilled holes on panels C and F. The cam lock bolts go into the SMALLER holes.
Install the wooden dowels (3) in panels C . The wooden dowels go into the LARGER holes.
3
3
1
1
42” -Two Door Wood & Metal Dog Crate