Need help?Do you have a question about the Fritz Gegauf Bernina artista 630 and is the answer not in the manual?
General| Brand | Fritz Gegauf |
|---|---|
| Model | Bernina artista 630 |
| Category | Sewing Machine |
| Language | English |
General safety regulations, including handling electrical components and using genuine parts.
Warnings about dangerous voltages on specific components and safety precautions.
Guidelines for protecting electronic components from electrostatic discharge during service.
Detailed technical specifications for both the artista 630 and 640 models.
Identification and description of PCBs, plugs, and cables used in the machine.
Procedures for performing visual, functional, mechanical, and sewing checks.
Instructions for powering and adjusting stepping motors.
Step-by-step guide to removing the head and rear covers of the machine.
Detailed steps for disassembling the S-Print, keypads, front panel, etc.
Instructions for disassembling and assembling the L-Print PCB, including fuse checks.
Procedure for tensioning the drive belt.
Procedure for adjusting the position of the head frame plate.
Procedure for adjusting the needle to hook distance.
Procedure for rough-adjusting the synchronizing disc.
Instructions for entering and exiting the service program's test modes.
Tests and information related to machine signals and sensors.
Tests and adjustments for motors, magnets, indicators, and thread cutter.
Instructions for updating the sewing/embroidery computer firmware.
Alternative method for updating firmware if standard method fails.
Lubrication points and diagram for the artista 630 model.
To Next Page