Fritz! 1200 - Page 8

8
Connecting the FRITZ!Repeater to the
Wireless Router Using the Wizard
If your wireless router does not support setup at the touch of a button (WPS),
use the wizard to connect the FRITZ!Repeater with the wireless router.
1
Establishing a Connection to the Computer
1. Plug the FRITZ!Repeater into an outlet near your wireless router. The
FRITZ!Repeater starts operation.
2. Wait until the LED starts slowly ashing green.
3. Select the Wi-Fi network of your FRITZ!Repeater on the computer, and start
the connection process.
4. Enter the network key of the FRITZ!Repeater. The precongured unique
network key is printed on the back of this guide and on the back of the
device housing.
The computer establishes a connection to the FRITZ!Repeater.