Fritz! AC 860 - Wireless LAN Connections

Wireless network
icon in Windows7
Adhoc network
in Windows7
Establishing a Network
1. Insert the FRITZ!WLAN
StickAC860 in your computer.
2. Click “AVM FRITZ!W-
LANStickAC860 Installation”
and confi rm the subsequent
queries. The FRITZ!WLAN
StickAC860 will be installed.
3. Click the wireless network icon
in the notifi cation area of the
Windows task bar.
4. Create an adhoc network.
5. Assign a name and a network key.
The network is set up and awaits
users.
For details, see the
FRITZ!WLANStickAC860 manual at:
en.avm.de/service.
Direct Connections
A direct connection (or adhoc network) is a network consisting of several wireless
devices, which does without a wireless access point and enables simple, direct
data exchange. The network is set up by one of the wireless LAN devices; the other
participants then register with this network.
FRITZ!WLAN Software
The FRITZ!WLAN software is installed on your computer along with the
FRITZ!WLANStickAC860. With FRITZ!WLAN you receive information on your
wireless LAN connection and the settings of the FRITZ!WLANStickAC860.
Starting FRITZ!WLAN
Double-click the FRITZ!WLAN icon in the Windows task bar. FRITZ!WLAN is
started.
For details, see the FRITZ!WLANStickAC860 manual at:
en.avm.de/service.
10 11
English
English