Update: Updating FRITZ!OS
FRITZ!Box 7490 45
6. Click the “Start Update” button.
The new FRITZ!OS is transmitted to your FRITZ!Box.
The update is complete when the “Info” LED stops flashing.
Using the Automatic Search for Updates
With the AVM service “Search for updates automatically” you
will always be informed about the latest FRITZ!OS updates for
your FRITZ!Box: When a new FRITZ!OS for your FRITZ!Box was
found, you will be notified on the “Overview” page. From here
you can then install the FRITZ!OS update; new updates will
not be installed automatically.
The service “Search for updates automatically” is enabled up-
on delivery of the FRITZ!Box, but you can disable it if desired.
The settings for this service are located in the “Contents /
AVM Services” area on the FRITZ!Box.
To Next Page
Loading...
