“go to TABLE OF CONTENTS”
FRIULINOX ALI GROUPS.R.L. A SOCIO UNICO 36
Via Treviso,4 - 33083 Taiedo di Chions (PN) -Italy
8.5. Condenser filter panel removal and cleaning
1. Loosen the central screw closing the front panel using a
screwdriver.
2. Lift the front panel, being careful to secure it to the
rear body.
3. Remove the springs that fix the filter panel with a
clamp.
4. Remove the filter panel from the seat.
Use a solution of water and neutral soap to clean it.
5. Reposition the filter panel in the seat.
6. Secure again the filter panel to the condenser with the
springs.
7. Do the same with the front panel, tear-strip
attached to the control panel.
8. Close the front panel again, paying attention to
the door microswitch.
To Next Page
Loading...