“go to TABLE OF CONTENTS”
FRIULINOX ALI GROUPS.R.L. A SOCIO UNICO 40
Via Treviso,4 - 33083 Taiedo di Chions (PN) -Italy
7. Remove, with the help of a flat-headed screwdriver, the
heater cables from the connector.
9. Using a 7 mm wrench, open the fixing nuts of the
heater.
10. Replace the heater by removing it from the holes on the
side bracket of the evaporator.
11. Replace the heater by inserting the cables in the
appropriate holes on the side of the evaporator.
12. Secure the cables again with the locking nuts.
To Next Page
Loading...