Friulinox Cube Series - Page 43

“go to TABLE OF CONTENTS”
43 FRIULINOX ALI GROUPS.R.L. A SOCIO UNICO
Via Treviso,4 - 33083 Taiedo di Chions (PN) -Italy
Service Manual
7. Remove the klixon from the evaporator.
8. Replace the klixon.
9. Fix the cables to the evaporator using clamps.
10. Close the connector.
11. Replace the heater by inserting the cables in the
appropriate holes on the side of the evaporator.
12. Secure the cables again with the locking nuts.