Friulinox Cube Series - Page 46

“go to TABLE OF CONTENTS”
FRIULINOX ALI GROUPS.R.L. A SOCIO UNICO 46
Via Treviso,4 - 33083 Taiedo di Chions (PN) -Italy
Service Manual
7. Remove the sticky tape that locks the heater on the
base.
8. Lift the evaporator.
9. Loosen the fixing screw of the bowl.
10. Lift the evaporator to remove the bowl with the drain
heater from the seat.
11. The drain heater and the condensate collection
bowl are a single component.
12. Place a new bowl under the evaporator, making sure to
firmly secure the heater with the sticky tape.