Fromm FS 250 - AL 5 FILM TEARING ALARM (Option 16.8242); COUNT SENSOR FOR CARRIAGE PHONIC WHEEL

FROMM CH12-TI-FS250.EN10
AL 5 FILM TEARING ALARM (Option 16.8242)
The arrised problem Possible remidies
This alarm indicates that the non-work time set for
the rubber pin (1) has elapsed due to:
Film roll finished
- Replace the roll
- Film tearing - Restore the film
- Card (2) not working - Replace the card
COUNT SENSOR FOR CARRIAGE PHONIC WHEEL
The arrised problem Possible remidies
-Phonic wheel sensor incorrectly positioned - Check for the correct positioning of the
sensor as compared to the phonic wheel
The distance should not be more than 2mm
- Sensor not connected properly
- Check for the correct connection of the
sensor by means of the associated
connector
- Sensor not working properly - Replace the sensor
1
2
ALARMS AND ERRORS