10
External power supply
Starting the
external power
supply
3. Connect (+) charging terminal to the plus cable of the system being supplied
4. Connect (-) charging terminal to negative pole of the system being supplied, or to
the vehicle body (e.g. engine block) in the case of vehicle electrical systems
5. Charger starts with the external power supply
1.
Important! Start external power supply manually if:
- there is no battery connected to the vehicle
- the battery voltage on the connected battery is < 1.0 V
1. Once the charging terminals are connected, press start/stop button for approx. 5
secs
WARNING! Risk of serious damage as a result of incorrectly connected char-
ging terminals. The reverse polarity protection facility is inoperative if the
external power supply is started manually. Connect charging terminals to
correct poles and ensure proper electrical connection to the system to be
supplied.
Starting the
external power
supply manually
2. For external power supply, select FSV mode
2. Ensure charging terminals are connected to correct poles
3. Start external power supply
To Next Page
Loading...
