126
IMPORTANT! When installing the new fan
note the airflow direction.
The fan must blow towards the center of the
device
Insert the new external fan into the fan
holder:
Position the fan at the top and push
downward
Feed in the fan cable
Insert the sealing plug (6)
IMPORTANT! The sealing plug must not le-
ak.
Replace the fan holder (5), making
sure that the locking devices (4) enga-
ge.
Fix the fan holder (5) with 2 X 5x14 mm
TX25 screws(3)
Tightening torque = 2.15 Nm
9
(6)
10
11
(3)(4)(3)(4) (5)
12
13
To Next Page
Loading...
