Fronius THP 120 - 300 SH - Retrofitting Tigi LED Insulation(I Version Only); Replacing the LED (I Version Only)

Retrofitting TIGi
LED insulation
(i version only)
(1)
NOTE!
If the LED insulation film is not present,
it can be retrofitted.
LED insulation film: 42,1600,0055
1
Open the hand grip as per the "Open-
ing the hand grip" chapter
2
If necessary, insert LED insulation film
(1)
3
Close the hand grip as per the "Clos-
ing the hand grip" chapter
Replacing the
LED
(i version only)
(1) (2)
NOTE!
When replacing the LED, the socket
housing must also be replaced.
Socket housing: 43,0003,0800
1
Open the hand grip as per the "Open-
ing the hand grip" chapter
2
Remove the coupling housing with
LED (1) from the guide
3
If necessary, insert LED insulation film
(2)
(2)
(3)
4
Carefully open the Minitek plug (2)
lock
5
Remove the socket housing (3) by
pushing forwards
17
EN-US