5
Insert the hosepack via the F++ con-
nection so that there is a gap of 12 cm
between the ball joint (hand grip) and
the power cable
6
Close retractable adapter
Assembling the F++ connection
1
Close the F++ connection as per the
“Closing the F++ connection” chapter
Installing the hand grip
1
Clip the gas and optional water con-
nections into the insulating plate (1)
and thread the power cable (2) in
2
Fit the coupling housing as per
chapter “Replacing the coupling hous-
ing”
3
Close the hand grip as per the “Clos-
ing the hand grip” chapter
33
EN-US
To Next Page
Loading...
