Gas-cooled version:
2
Connect the power cable (1)
3
Seal the gas connection (2) in the
thread with Loctite 542, tighten and
secure the gas hose with clamp 8
Inserting hose components
1
Screw M7 power connection (1) onto
retractable adapter (2)
2
Insert the socket housing (3) into
adapter recess
3
Place gas and optional water hoses
onto the power cable 4.5 cm behind
the power connection (4)
4
Wrap socket housing and hoses in
adhesive tape (5) and secure for
drawing in
5
Insert the hosepack via the F++ con-
nection so that there is a gap of 8.5
cm between the ball joint (hand grip)
and the power cable
6
Close retractable adapter
44
To Next Page
Loading...
