Fronius THP 120 - 300 SH - Page 54

Mounting the control line plug at the coupling connector end
1
Thread the control line plug onto the
cable
2
Plug in wires as follows:
- Green → A
- Yellow → B
- White → C
- Brown → D
3
Close the control line plug
Mounting the coupling connector
(3)
(1)
(2)
1
Connect the power cable (1)
2
Connect the gas hose (3) and secure
it with clamp 7 (2)
(1)(2)
(4)
(3)
3
Insert the insert pieces (1)
4
Thread in control line (2)
Water-cooled version only:
5
Thread in water flow hose (3) and
water return hose (4)
54