Fronius TransSteel 2200c - Brake Setup on the Wirespool Holders; Brake Setup on the D100 Wirespool Holder; Brake Setup on the D200 Wirespool Holder

120
Brake setup on the wirespool holders
Brake setup on
the D100 wire-
spool holder
Brake setup on
the D200 wire-
spool holder
D100
WARNING! Fitting the equipment incorrectly can cause serious injury and dam-
age.
- Do not dismantle the brake.
- Maintenance and servicing of brakes is to be carried out by trained, qualified
personnel only.
The brake is only available as a complete unit.
This illustration is for information purposes only.
D200