89
EN
Operation
Operation
NOTE! Accessing the Setup menu is described with reference to the MIG/MAG
standard synergic (SYNERGIC) welding process. Access is the same for the oth-
er welding processes.
Accessing the Setup menu:
Press the "Process" button to select the SYN-
ERGIC welding process (to access the Setup
menu for MIG/MAG standard manual welding,
press the "Process" button and select MANU-
AL)
Press and hold the "Mode" button
Press the "Process" button
Release the "Mode" and "Process" buttons
Changing welding parameters
Select the desired setup parameter using the
left-hand adjusting dial
Alter the setup parameter value using the right-
hand adjusting dial
Exiting the Setup menu
Press and hold the "Mode" button
Press the "Process" button
Release the "Mode" and "Process" buttons
1
2
3
4
5
6
7
8
9
To Next Page
Loading...
