Fronius TransSteel 2200c - Operation

99
EN
Operation
Operation
Accessing the Setup menu:
Press the "Process" button to select the SYN-
ERGIC welding process (to access the Setup
menu for MIG/MAG standard manual welding,
press the "Process" button and select MANU-
AL)
Press and hold the "Mode" button
Press the "Process" button
Release the "Mode" and "Process" buttons
Select the "2nd" setup parameter using the left-
hand adjusting dial
Press and hold the "Mode" button
Press the "Process" button
Changing welding parameters
Select the desired setup parameter using the
left-hand adjusting dial
Alter the setup parameter value using the right-
hand adjusting dial
Exiting the Setup menu
Press and hold the "Mode" button
Press the "Process" button
Release the "Mode" and "Process" buttons
- A parameter is displayed in the first level of
the Setup menu
Press and hold the "Mode" button
Press the "Process" button
Release the "Mode" and "Process" buttons
1
2
3
4
5
6
7
1
2
1
2
3
4
5
6