Fronius TransSteel 5000 Syn - Connections, Switches and Mechanical Components; Tst 3500;5000 Syn Power Source

Connections, switches and mechanical compon-
ents
TSt 3500/5000
Syn power
source
(1)
(2)
(3)
(4)
(6)
(7)
(9)
(8)
(5)
(1) (-) - current socket with bayonet latch
Used for
-
Connecting the grounding cable during MIG/MAG welding
-
Connecting the electrode cable or grounding cable during manual
metal arc welding (depending on the type of electrode used)
(2) Mains switch
For switching the power source on and off
(3) (+) - current socket with bayonet latch
Used for
-
Connecting the current cable from the interconnecting hosepack dur-
ing MIG/MAG welding
-
Connecting the electrode cable or grounding cable during manual
metal arc welding (depending on the type of electrode used)
(4) Gas preheater socket (option)
(5) Machine interface (optional)
(6) EASY DOCUMENTATION sticker
(7) Mains cable with strain relief device
(8) LocalNet port
Standardised connection socket for the wirefeeder (interconnecting
hosepack)
(9) Air filter
Remove from the side for cleaning
37
EN