Fronius TransSteel 5000 Syn - Connecting MIG;MAG Welding Torches; Inserting;Replacing Feed Rollers

Connecting
MIG/MAG weld-
ing torches
1
* when the optional water connection
and the water-cooled welding torch are
fitted
Inserting/repla-
cing feed rollers
CAUTION!
Danger from feed roller holders flying upwards.
This can result in injuries.
▶
When unlocking the clamping lever, keep fingers away from the area to the
left and right of the lever.
2
1
4
4
5
6
3
1
6
3
31
2
4
5
7
2
CAUTION!
Danger from exposed feed rollers.
This can result in injuries.
▶
Always fit the protective cover of the 4-roller drive after inserting or repla-
cing a feed roller.
54