Fronius TransSteel 5000 Syn - Setup Menu - Level 2 Parameters

Setup menu - Level 2
Operation (level
2 Setup menu)
To access the Level 2 Setup menu:
1
Use the "Process" button to select the
"MIG/MAG standard synergic welding"
process
+
+
2
The control panel is now in the Setup
menu for the "MIG/MAG standard syn-
ergic welding" process - the last setup
parameter that was selected is dis-
played.
3
Select the "2nd" setup parameter us-
ing the left-hand adjusting dial
+
+
4
The control panel is now in the second
level of the setup menu for the
"MIG/MAG standard synergic welding"
process - the last setup parameter
that was selected is displayed.
Changing welding parameters
1
Select the desired setup parameter us-
ing the left-hand adjusting dial
Alter the setup parameter value using
the right-hand adjusting dial
Exiting the Setup menu
+
+
1
A parameter is displayed in the first
level of the Setup menu.
+
+
2
98