To Next PageTo Next Page
Need help?Do you have a question about the Fronius Vizor 4000 Plus and is the answer not in the manual?
General| Brand | Fronius |
|---|---|
| Model | Vizor 4000 Plus |
| Category | Motorcycle Accessories |
| Language | English |
Choose the desired shade number (SL 8-12) for welding operations.
Switch the cartridge to grinding mode, indicated by a flashing red LED.
Adjust the light sensitivity to match welding arc and ambient light conditions.
Set the delay time for the filter to transition from dark to light state.
Modify the sensor's detection angle for ambient light.
Procedure for replacing the inside cover lens (SP05).
Procedure for replacing the front cover lens (SP03).
Steps for removing and installing the welding filter cartridge (SP02).
Instructions for replacing the CR2032 batteries in the welding filter cartridge.
Explanation of shade level markings according to EN169 and amperage.
Meaning of markings on the welding filter regarding manufacturer, standards, and impact.
Overview of welding helmet function, components, and protective features.
Essential safety instructions, precautions, and potential risks during use.
Detailed guide on adjusting headband, shade level, sensitivity, delay, and sensor slider.
Instructions for cleaning the cartridge and lenses, and proper storage.
