Fronius VR 1550 CMT-WS - Technical Data; General Remarks

37
EN
Technical data
General remarks
NOTE!
The specified degree of protection is only guaranteed if the VR 1500 "cover" instal-
lation kit is installed.
VR 1500
VR 1500 - 11
Supply voltage 55 V DC
Nominal current 4 A
Wire diameter 0.8 - 1.6 mm
0.03 - 0.06 in.
Wire feed speed 0.5 - 22 m/min
19.69 - 866.14 ipm.
Torque 4 Nm
Degree of protection IP 21
Dimensions l x w x h 405 x 208 x 205 mm
15.94 x 8.19 x 8.07 in.
Weight 7 kg
15.43 Ib.
Drive 4-roller drive
Maximum shielding gas pressure 7 bar
101 psi.
Coolant Original Fronius coolant
Maximum coolant pressure 6 bar
87 psi.
Supply voltage 55 V DC
Nominal current 4 A
Wire diameter 0.8 - 3.2 mm
0.03 - 0.13 in.
Wire feed speed 0.5 - 11 m/min
19.69 - 433.07 ipm.
Torque 11 Nm
Degree of protection IP 21
Dimensions l x w x h 400 x 300 x 205 mm
15.75 x 11.81 x 8.07 in.
Weight 8 kg
17.64 Ib.
Drive 4-roller drive, water-cooled electric motor
with shrunk-on-disc rotor
Special accessories Additional fan for the power electronics
Maximum shielding gas pressure 7 bar
101 psi.