Need help?Do you have a question about the Fronus Infineon 3.5KVA and is the answer not in the manual?
General| Input Voltage Range | 170-280VAC |
|---|---|
| Waveform | Pure Sine Wave |
| Transfer Time | <10ms |
| Rated Power | 3.5 kVA |
| Output Power | 3500W |
| Output Frequency | 50Hz / 60Hz (Auto detection) |
| Protection | Overload, Short Circuit |
| Operating Temperature | 0°C to 40°C |
Key safety warnings and precautions for operating the inverter.
Step-by-step guide for connecting the battery to the inverter.
Instructions for connecting AC power input and output terminals.
Details on connecting solar PV modules, including voltage and power specifications.
Overview of the inverter's front panel controls and indicators.
Explains the meaning of various icons shown on the LCD display.
Settings for battery equalization voltage, time, timeout, interval, and solar feed to grid.
Explains how the inverter operates when connected to the utility mains.
Explains how the inverter operates when powered by battery and/or PV.
Steps to enable and activate the battery equalization feature.
Lists fault codes, their events, and corresponding icons on the inverter.
Lists warning codes, events, audible alarms, and icon flashing.
Technical specifications for the inverter when operating in inverter mode.
Specifications for utility and MPPT solar charging modes.
Lists common problems, their causes, and recommended solutions.
To Next Page
