User’s manual · TSQ 310
- 1 - TSQ 310 version_en_1.1 FTE maximal
NOTE:
This user’s guide is adapted to software version 000A/0003 of TSQ 310 dated
18/10/2010.
For future software updates, you can download the user’s guide from the following website:
http://www.ftemaximal.com/
Chapter 1. Installation.
1.1. Safety Measures
1.- Never place the device next to hot sources.
2.- Never undergo the device to temperatures that exceed its level of operation.
3.- Never expose the device to leakings nor spatterings.
4.- Never place objects that contain liquids over the device.
5.- Respect the ventilation slots of the device, do not cover them with any kind of object.
6.- The space around the device must be free of objects, in a minimum radius of 40cm.
7.- Avoid locations with possibilities of spilling liquids on the inside of the device, and with important changes of
temperature.
8.- Never open the device by yourself due to electric risk. In case of problems, go always to qualified technicians
9.- Never, under no circumstances, open the device when connected to the electrical net..
10.- During the handling it is better to disconnect the device from the electrical net.
11.- Obey the electricity security rules during the assembling. Use materials that obey the current law.
12.- The connecting plug must be accessible in a fast and simple way to have a fast disconnection.
13.- Never touch the plug with wet hands. Also, disconnect always the device before handling the connections.
14.- Never put any heavy object over the device, since it could get damaged.
15.- If the device is going to remain some time without use, it is recommendable to disconnect it from the electrical net.
16.- The repairmen and the maintenance of the device must be done by TV and radio specialised technicians.
1.2. Box content
Quick installation guide 2 x Bridge F male – F male DC Cable
TSQ 310 Cable 12 cm PIN to PIN RJ45 – RJ45
To Next Page
Need help?
General
