CHAPTER 5 SERVO ADJUSTMENT
Profile Operation 5-25
5
5.9 Profile Operation
5.9.1 What is Profile Operation?
Even if the host control unit is not connected, automatic operation can be executed according to the
specified operation pattern.
The motion continues until the user stops it. Use this feature to check the load condition of the
mechanical system, effective torque, etc.
During profile operation, parameters are not tuned.
Operate the PC Loader or keypad to perform profile operation.
Select the operation pattern and press the "START/STOP" button to start to operate.
In case of operation at PC Loader
To Next Page
Loading...