Fuji Electric ALPHA5 Smart - Page 330

CHAPTER 6 KEYPAD
6-18
Monitor Mode
6
(10) Command pulse frequency (displayed digits: signed five digits)
The pulse frequency supplied to the pulse input terminal is
displayed. The value is displayed in 0.1 kHz.
The displaying range is from -1000.0 to 1000.0 kHz.
on10
SET
(1 sec. or over)
1
----
000
.
0
Blinks three times.
- 1
Blinks three times.
0
00
.
0
-
0
0
.
0
----
ESC
ESC
SHIFT
With a negative data
The figure and "-" symbol are displayed alternately.
With a negative data
U
L
／