CHAPTER 6 KEYPAD
Parameter Edit Mode 6-37
6
An example of editing operation
Change parameter PA1_7 (denominator of electronic gear) to100000.
Key operation
Remarks
An example of indication in sequence mode
Return to mode selection.
Select the parameter editing mode.
The parameter number is displayed.
Select parameter PA1_7.
Blinks three times.
The set detail (upper three digits) of PA1_7 is
displayed next.
The third digit of upper-digit display blinks.
Shift to the desired editing digit.
Increase the value to "1."
Shift the target to the first digit.
Blinks three times.
The set detail lower four digits) of PA1_7 is
displayed next.
The fourth digit of lower-digit display blinks.
Shift to the desired editing digit.
Blink
Blink
[MODE]
[MODE]
[SET] (1 sec. or over)
[]
[SET] (1 sec. or over)
[SET]
[]
[SET]
[SET]
[SET]
~PoF
Sn01
PA01
P1
To Next Page
Loading...