Fuji Electric ALPHA5 Smart - Positioning Data Edit Mode

CHAPTER 6 KEYPAD
6-40
Positioning Data Edit Mode
6
(2) Target position
Set the target position of the motor. The setting value
range is from -2000000000 to 2000000000 in increments
of 1.
Set the target position of the servomotor for ABS command
method, and set the incremental value for INC.
SET
(1 sec. or over)
Pd_2
_20
----
0000
----
Blinks three times.
0000
----
Blinks three times.
Blinks three times.
ESC
ESC
ESC
SHIFT
SHIFT
-20
With a negative data
U
L
／